The scrap briquetting machine adopts a high-pressure and high-energy-density hydraulic transmission system, which has large pressing force, stable briquetting size, and low energy consumption. It operates fully automatically with PLC intelligent control, is simple to operate, and requires little equipment maintenance. It adopts high-strength, corrosion-resistant Made of high-strength materials, it is safe and reliable; crushing, chipping and other equipment can be configured according to user needs; the entire equipment has a compact structure and a small footprint; it has a high degree of automation and high production efficiency; it does not require manual cleaning of waste materials and maintenance, and is safe and reliable. Adopting high-pressure closed hydraulic transmission system, the operation is safe and reliable.

When the raw materials are fed between the upper and lower pressure rollers, the upper and lower pressure rollers begin to compress the raw materials and squeeze them into a round cake shape. There is a discharge guide device at the discharge port so that when the pressure rollers rotate, Push the material out. When the lower pressure roller moves to the left or right, the upper and lower pressure rollers exert different pressures on the raw materials. When the raw material is extruded to the discharge guide device, the compressed material enters the lower pressure roller through the guide. Due to the different specifications of each roller, there are a certain number of indentations on each roller. When the raw material is pressed into the lower pressure roller, a high-pressure area will be formed between the rollers. At this time, the material is squeezed and squeezed Press into round cake shape. In order to prevent the pressure roller from wearing and not damaging the raw materials, a certain pressure and stroke must be ensured. A safety protection device is installed between the upper and lower pressure rollers to enable safe operation.